3 Easy Steps To Starting Your Own Worm "Ranch"

Click Here For A Printer Friendly Page

1. MAKE OR GET A WORM BIN
Wooden, plastic or metal boxes or tubs may be used. The container should be 8'-12’ deep and of a size to accommodate the amount of garbage you produce. Approximately one square foot of surface area Is needed for each pound of kitchen vegetable wastes per week. For example, a 1'× 2''× 3' box will serve a family of 4 to 6. Detailed Instructions for constructing your own bin are included on this page and soon we will be offering our own pre-assembled system with all sorts of neat bells and whistles.2.ADD BEDDING
Bedding holds moisture and provides a medium In which the worms can work and the garbage can be buried. It must be light and fluffy enough to allow air exchange.-Worms actually consume bedding as well as the kitchen vegetable wastes.-Bedding can be made of shredded newspaper, shredded corrugated cardboard, peat moss, or leaf mold.-Bedding must be well soaked In water and wrung out before adding to the bin. You may add a handful of dirt every time the bedding Is changed although It Is not necessary.3. ADD WORMS
Red worms are the most satisfactory and efficient type of worm to use for composting. The worms need adequate temperature, moisture and ventilation. The optimum temperature Is from 55-77 degrees. Remember, an active worm bin must be kept In a heated garage or basement during the winter to prevent freezing. The worm population increases according to how well they are fed. To determine the number of worms needed to populate a bin, figure one pound of worms for each pound of kitchen vegetable wastes produced per day. Worms process their own body weight or more of organic matter each day.4. FEED'EM
Remember, your redworms will eat ANYTHING ORGANIC, but we do not recommend feeding animal products like meat or dairy products because of the rancid smell and pests that these materials attract while composting.  Everything else can be food: all kitchen waste, old clothes (cotton, silk or other organic material only), newspaper (preferably well-shredded), horse and cow manure, once again, ANYTHING ORGANIC!  Because redworms need a moist environment to survive make sure all food material is damp.  For instance, when feeding an old tee-shirt to your new pets, soak it in water first and then wring it out a bit before placing it on the pile.                   P.S.    Using an old tee-shirt or old carpet as a blanket for your pile will allow the worms to come all the way to the surface to eat, without being exposed to light.  This makes harvesting castings and worms much easier as most of the worms will be in the top 4 inches. 5. HARVEST COMPOST
While there are several methods of harvesting compost and adding new bedding, the most convenient is to move the compost to one side of the bin and add new bedding and garbage to the other. Replacing the plastic sheet on only the half of the bin containing the new bedding will allow the compost to dry out some. The worms will migrate to the fresh material and the compost may be removed and replaced with new bedding. This migration may take several weeks.Note: Kitchen vegetable wastes compost well in a worm bin and yield valuable worm compost called "castings". Growers know castings to be the most nutrient-dense compost available. Castings promote soil structure and fertility, while offering plants an excellent source of non-burning, readily available nitrogenTo maintain this system simply rotate burial of food wastes throughout the bin. Every 3-6 months compost should be moved to one side of the bin and new bedding added to the empty half. At this time start burying wastes in the new bedding only. Within one month worms will populate the new bedding, finished compost may be harvested and the rest of the bin can be rebedded. During the winter, worm bins should be kept in a cool indoor space such as a basement or warm garage to avoid freezing. A properly maintained worm bin is odorless. Bins may be placed in a shady outdoor space the remainder of the year. Flies may be controlled by placing a sheet of plastic over the bedding.

CONSTRUCTING YOUR OWN BIN

This bin can be built for about $35 with new wood and hardware, or less using recycled materials such as old wood boxes or other containers. Any worm bin must have drains I\in the bottom and a tight fitting lid to keep moisture in and pests out. If you plan to bring your bin into your living area, place a layer of remay (also known as row cover), on the bottom of the bin, before adding the bedding. A starter batch of worms for a bin this size should be between 3-6lbs. ( Remember: worms will eat their own body weight or more a day. )Materials: Tools:

1 ½" treated sheet of plywood Tape measure, skill saw or rip hand saw,
hammer, saw horses, long straight edge
or chalk snap line, screwdriver, and drill
with ½" bit.

1 12 foot 2'×4

1 16 foot 2'×4

2 lbs. 6d galvanized nails

½ lb. 16d galvanized nails

2 galvanized door hinges Use eye and ear protection.

Measure and cut plywood as indicated in drawing above. Cut the 12 foot 2'×4 into five pieces: two 39", two 23", and one 20" long. Nail the 2'×4s together on edge with two 16d nails at each joint as illustrated in the Base Frame diagram. Nail the plywood base piece onto the 2'×4 frame.Cut four 1 foot lengths out of the 16 foot 2'×4. Take each plywood side piece and place a one foot 2'×4 under each of it’s ends so that the 2'×4 is flush with the top and side edges of the plywood, and nail the boards into place. Nail the side pieces onto the base frame. To complete the box, nail the ends onto the base and sides. To reinforce the box make sure there is a nail staggered at least every 3 inches wherever plywood and 2'×4s meet. Drill twelve ½" holes through the bottom of the box for drainage.

To build the lid, take the remaining 12 foot 2'×4 and cut it into two 45" pieces and two 20" pieces and lay them flat (short pieces on the inside as indicated in diagram above) so that the plywood top is inset from the edges of the 2'×4 by 1-½" all the way around the perimeter. Nail the plywood onto the 2×4 securely. Place the hinges on the backside of the box at both ends on the 2'×4s, and on the under side of the 2'×4 lid frame, so that the lid will stand upright when opened.

 I hope that helps get you started! Feel free to call or e-mail us at any time for help with your project. Happy Worming!
(314)602-0736    Info@magicworms.com